Toshiba Satellite 200 Series User Manual page 216

Using Your Computer on Your Desk
Using the Optional NoteDock
Use the parallel port to connect a parallel printer or other parallel
device. This port replaces the computer's parallel port.
Use the power socket to connect the NoteDock to AC power,
using a power cord.
Use the security lock slot to attach a security cable to the Note-
Dock. This cable is discussed in "Applying Physical Restraints"
on page 238.
Volume dial
The right and left sides of the NoteDock
Use the two PC card slots to install Type III PC cards. The slot on
the right of the NoteDock is referred to as Slot 2. The slot on the
left side is referred to as Slot 3. For more information, see "Using
PC Cards in the NoteDock" on page 227.
Use the volume dial to adjust the loudness of the system speaker.
Use the external diskette drive port to connect the external 3.5-
inch diskette drive.
Locking latch
Guide pin
The front of the NoteDock
The view of the NoteDock above identifies:
the locking latch and metal latches that secure the computer
to the NoteDock.
Diskette drive port
PC card slots
Guide pin
Computer connector
Power connector
225