Advertisement
DG-104S VoIP Station Gateway
After making your changes in the fields above, press RESET DEVICE TO START UPDATE to initiate the update
sequence.
"" !&
♦
Software Update Mode This specifies downloading the image file through a WAN Link.
♦
TFTP Server Address The IP address of the TFTP server where the runtime or configuration file is
located. This entry is used only if the Firmware Update is set to Enable.
♦
Firmware Update Determines whether or not the device will try to look for a runtime image file on the
TFTP server.
♦
File Name The complete path and filename of the runtime image file on your TFTP server to be uploaded
to the device.
♦
Use Config File Toggle to Enabled to use the settings in a configuration text file when the device is reset
(rebooted).
♦
File Name The complete path and filename on the TFTP server for the desired configuration file.
♦
Last TFTP Server Address This is a read-only field that displays the IP address of the last TFTP server
to be accessed.
To save all the changes made in the current session to the device's flash memory, use the arrow keys to highlight
the fourth menu item on the Boot Menu, Save Changes, and press <Enter>. The Saving Settings screen will be
displayed:
(!
20
Advertisement
