Table of Contents
Advertisement
OPERATION
The power wheelchair is simple to operate. However, we recommend that you read carefully the following
instructions to become familiarized with your new vehicle.
A Word of Caution:
Before you turn the power on, always be aware of the environment that surrounds you to select your desired
speed. For indoor environments we recommend that you select the slowest speed setting. For outdoor
operation of this vehicle we recommend that you select a speed that is comfortable for you to control it
safely.
The following steps are required to operate your vehicle safely with the controller-can use for P4AS (See Fig
13)
Battery
Condition LED
HORN
Speed control
Joystick
A. Driving:
1.Controller ON/OFF Switch
Press the ON/OFF button (I/O) switch located in front of the joystick to activate your power wheelchair.
The battery condition meter will light up to indicate the current charge of your battery. Pressing the
ON/OFF button again will deactivate the controller.
2. Speed Control
The speed control buttons allow you to set the forward speed to your desired setting. Pressing the
speed-increasing button will set the speed at the faster settings while the speed will slow down if you
press the speed-decreasing button. The controller sets the reverse speed, acceleration and deceleration
proportion-
ally and automatically for your safety.
3.Joystick
The joystick controls the direction and speed of your vehicle, pointing the joystick away from the
neutral position (center) will move the vehicle in the direction where the joystick is pointing. The
farther away (forward/backward) the joystick is from the neutral position, the faster the vehicle will go.
(Fig 13)
ON/OFF
Speed
indication
Speed
control
11
Advertisement
Table of Contents
