Searching A Station Manually: Manual Search - JVC KD-LX50 Instructions Manual

Searching a station manually: Manual search

1
1
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen
to an FM broadcast.
2
3
When an FM stereo broadcast is hard to receive:
1 Press MODE while listening to an FM stereo broadcast (the ST indicator lights up while
receiving an FM stereo broadcast).
"MODE" appears on the lower part of the display, and the number buttons can work as
different function buttons.
2 Press MONO (monaural), while "MODE" is still on the display, so that the MO indicator
lights up on the display.
The sound you hear becomes monaural but reception will be improved (the ST indicator
goes off).
Each time you press the button, the MO indicator lights up and goes off alternately.
8
MODE
MONO
2
Select the band.
1 Press SOURCE (ATT) to select the tuner as the source.
2 Press BAND to select the band (FM1, FM2, FM3 or AM).
Press and hold
starts flashing on the display.
To tune into stations
of higher frequencies
To tune into stations
of lower frequencies
1- 1-
1 2
¢ or 4
Tune into a station you want while
"M" is flashing.
• If you release your finger from the button, the
manual mode will automatically turn off after
5 seconds.
2,3
until "M" (Manual)