Page 2
MTP 440 DM Introduction Thank you that you have opted for a LEWITT product. In this operating manual you will learn more about your LEWITT microphone, its handling and its proper usage. Music professionals know that it’s often the smallest details that make all the difference in vocal and instrumental recordings.
Page 3
MTP 440 DM The product The MTP 440 DM is an exceptionally versatile, precision-engineered cardioid dynamic microphone ideally suited for upscale live sound and studio recording applications. Featuring a high-performance capsule which delivers a remarkably bright and lively sound, the MTP 440 is perfect for miking drums, percussion instruments, brasses, woodwinds, and vocals.
Page 4
MTP 440 DM Features / Top applications Features · Tailored frequency response for instrument applications ·Highly consistent cardioid polar pattern for minimum off-axis coloration ·High gain before feedback ·Easily withstands high sound pressure levels ·Rock-solid full-metal, die-cast body for rough daily touring routine ·Minimally affected by varying load impedance...
Page 5
MTP 440 DM Using the mic Connecting and Disconnecting the Microphone Cable ·Before establishing connection, make sure that the microphone and the component (e.g. amplifier) are switched off. ·Lower the volume of the component (e.g. amplifier) before connecting the microphone.
Page 6
MTP 440 DM Using the mic / Tech data Hints 1 In order to prevent feedback (howling): ·Lower the volume. ·Place the microphone so that it is not pointed to the speaker and that there is a sufficient distance between the microphone and the Dimensions speaker.
Page 9
MTP 440 DM Cautions Cautions · The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress and force. ·To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures.
While under warranty period, defective products may be returned to the authorized LEWITT dealer together with original proof of purchase. To avoid any damages in transit, please use the original packaging if available. Please do not send your product to LEWITT GmbH directly as it will not be serviced.
EN 61000-3-3:1995+A1:2001+A2:2005 Manufacturers signature: Product testing was carried out by TIMCO Engineering Inc., notified body number 1177. LEWITT GmbH hereby declares under its sole responsibility that Date: 18th November 2010 DI Roman Perschon MTP 4 DM has been tested and conforms to the following FCC and Place: Vienna, AUSTRIA CEO –...
Page 12
Mooslackengasse 17 1190 Vienna AUSTRIA info@lewitt-audio.com...
Need help?
Do you have a question about the MTP 440 DM and is the answer not in the manual?
Questions and answers