Whereas classic dynamic handheld vocal microphones like Lewitt‘s MTP 840 DM are your best bet in noisy and rough rock & roll stage environments, the MTP 740 CM is perfectly qualified to transfer even the most nuanced and delicate vocal arrangements from the studio to a live stage.
features Hardened spring steel mesh grille to prevent wear and abuse Uncompromising true studio condenser sound for Corrosion-resistant, gold-plated 3-pin stage performance connector Cardioid polar pattern for clean live sound and effective rear rejection Huge dynamic range of 140 dB (A) and exceptionally Top applications low self-noise of 14 dB (A) thanks to innovative direct coupling technology (patent pending)
User Interface Status Indicator Indicates different active settings such as low-cut filter and pre-attenuation. You can turn off the LED‘s with the LED switch Low-cut filter Use this filter to get rid of unwanted low frequency content caused by wind, footsteps, structure-borne noise, etc. The low-cut filter at 80Hz affects the microphone input by 12dB per octave and can be accessed by unscrewing the upper part of the grill.
Safety Guidelines The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress and force. To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures.
To avoid any damages in transit, please use the original packaging if available. Please do not send your product to LEWITT GmbH directly as it will not be serviced. Freight charges have to be covered by the owner of the product.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause DI Roman Perschon undesired operation. CEO LEWITT GmbH Declaration of conformity can be requested at info@lewitt-audio.com.
Need help?
Do you have a question about the MTP 740 CM and is the answer not in the manual?
Questions and answers