Video In Confi Guration; Mercury; Software Updates And Data Backup - Lowrance HDS-7 HDS Gen3 Installation Manual

Only one DHCP device may be operational on the same network
at a time. If a second device is found, turn off it's DHCP feature if
possible. Refer to the device's own instructions for further assistance.
 Note:
Iperf and DHCP Probe are tools provided for diagnostic
purposes by users familiar with network terminology and
confi guration. Navico is not the original developer of these tools,
and can not provide support related to their use.
Internal Wireless
Select this option to enable or disable the internal wireless module.
Disabling wireless if not in use will reduce the display's power
consumption.

Video In confi guration

Press the menu key when on the video page or
panel to highlight the setup dialogue.
Enable PAL or NTSC depending on the video ouput
standard of the selected camera.
You can optimize the video display by adjusting the
video image settings (brightness, saturation, etc.).
The settings are applied individually for each video
source.
Mirror image may be applied where the camera is
providing a rear view, and the user wishes to see
objects as they would appear in a vehicle rearview
mirror, ie, on the same side as they actually are.
Mercury®
If the HDS Gen3 is on the same NMEA 2000 network as a Mercury
VesselView® 4 or 7, a host of Mercury® specifi c features are
automatically unlocked on the HDS. When the features are enabled,
the display may prompt the user for some basic confi guration
information. Refer to the VesselView® manual or engine supplier for
further information.

Software updates and data backup

From time to time Lowrance releases software updates to its
existing products. Updates are created for a variety of reasons; to
add or improve features, to add support for new external devices, or
to fi x software bugs.
| 49
Software setup | HDS Gen3 Installation Manual