Devices Setup; Camera; Figure 22 ─ Devices Menu; Figure 23 ─ Camera Setup Screen - ADT 4-channel DVR User Manual

Devices Setup

Camera

Highlight Camera in the Devices menu and press the
Figure 23 ─ Camera setup screen.
Highlight the PTZ tab, and the PTZ setup screen displays.
Figure 24 ─ Camera PTZ setup screen.
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the
the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number. The
PTZ ID number can be set from 0 to 256.
Figure 22 ─ Devices menu.
Highlight the box in the Product column for the PTZ camera you wish to configure and
press the button. A list of PTZ devices appears. Select your camera from the list and
press the button. You will need to connect the camera to the RS485 connector on
the back of the DVR following the camera manufacturer's instructions.
button. The Camera setup screen appears.
You can turn the camera number On or Off, and you can
change the Title of each camera using the virtual keyboard.
NOTE: You will only be able to set up PTZ devices if the
PTZ port is set to RS485.
4-Channel Digital Video Recorder
button. Change
19