Shutdown; Network Setup; Network; Figure 13 ─ Storage Status Setup Screen - ADT 4-channel DVR User Manual

User's Manual
Figure 13 ─ Storage Status setup screen.
NOTE: When the S.M.A.R.T. displays Bad, the screen displays a message box. Once the "Bad" message displays,
replacing the hard disk drive is recommended, usually within 24 hours.
NOTE: Temperature and S.M.A.R.T. information will be available only for internal hard disk drives supporting
the SMART (Self-Monitoring Analysis and Reporting Technology) monitoring program.

Shutdown

Highlight Shutdown in the System menu and press the
whether or not you want to shut the system down.
Figure 14 ─ Shutdown screen.

Network Setup

Network

Highlight Network in the Network menu and press the
able to change the Network, LAN, DVRNS and WebGuard settings.
14
The Type column displays the type of storage device.
The Disk Bad column displays the percentage of bad sectors.
Not formatted indicates the device is not formatted.
The Temperature column displays the temperature of the
storage device.
 Good – The temperature is normal.
 Bad – The temperature is 70
 N/A – The DVR cannot read the temperature.
The S.M.A.R.T. column displays "Good", "Bad" or "N/A",
depending on storage conditions.
 Good – The storage condition is normal.
 Bad – Data cannot be written on or read from the storage
 N/A – Storage conditions are normal, however, the S.M.A.R.T.
button. The Shutdown screen displays asking you to confirm
After selecting Shutdown and pressing the
you when it is safe to disconnect power.
Figure 15 ─ Network menu.
button. The Network setup screen displays. You will be
device.
monitoring is not working or supported.
o o
C (158 F) or higher.
button, a screen will appear telling