•
A flashing CO button tells you an outside call is received. You can answer the call by
pressing the flashing CO button.
•
While setting, you can temporarily cancel this feature by pressing the FWD/DND button.
Pressing the FWD/DND button alternates between setting or cancelling the mode.
•
You can set the "Do Not Disturb" and "Call Forwarding" features at the same time. However,
only one feature will work at a time. You can change the feature by pressing the FWD/DND
button while on-hook. Pressing the FWD/DND button changes the feature as follows:
DND
FWD
Specified extensions can override this setting and call DND extensions (Do Not Disturb
•
Override).
•
The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Red on: DND mode
Flashing red: FWD mode
•
This feature also works for paging-group and an incoming call from a doorphone.
•
This feature is not available for an ISDN telephone user.
4.1 Customising Your Phone (Station Programming)
•
4.1.2 Customising the Buttons
Create or re-arrange an FWD/DND button.
Operation
OFF
2.7 Setting the Telephone According to Your Needs
97