Clock Setting; Auto Clock Set; Alarm Setting - Sangean WR-2 Operating Instructions Manual

Clock Setting

1. When radio power is off, long press SET button until display
flashes " AM 12:00" or "0:00" depending on the sales areas.
2. Press and release Hour and Minute button or rotary tuning
control button to set the required clock time.
3. Press SET button again to complete clock setting.
Display stops flashing .
Note :
when radio power is on, press Display button to clock mode and
follow same procedures as above for clock setting .
4. Same procedures can be done via supplied remote control unit.

Auto clock set

The RDS equips with auto clock set function, turn on the radio
and search for radio stations with RDS transmitting service,
within one minute the clock will show correct time along with
RDS symbol indicating the clock time is RDS time from radio
station with RDS service .
Note:
RDS service is mainly available in Europe (including UK) and part
of Northern America plus some of Asian countries only.

Alarm setting

Note:
Alarm setting can be done only when time setting is completed.
Alarm can be operated when radio is on or off.
Setting via remote control is the same.
GB
8