KitchenAid KBMS1454R Technical Education page 39

9. Remove the three lower housing T20 Torx
screws and remove the lower housing.
Cooling Fan Motor
Lower Housing
3 Screws
10. Remove the two cooling fan motor shoulder
T20 Torx screws from the upper housing
and remove the motor from the housing.
Screws
11. Pull the fan off the motor shaft.
Fan
REASSEMBLY NOTE: When you mount the
motor to the upper housing, be sure to position
the motor with the wires as shown in the top
photo so they can be routed through the wire
slot in the side of the housing.
4-13
Cooling Fan Motor
Upper Housing
Wire Slot
Motor