Ivg Constant Keys; Ivh Project Keys - Black & Decker BDCAL100 Instruction Manual

IVg. Constant Key
[ ] - Input the constant
IVh. Project Keys
[Paint] - Computes volume of paint ( in gallons /
quarts / pints ) basing on the
entered area and a stored value of
Paint Coverage per Gallon.
- Computes the area covered by the
defined Paint Coverage per Gallon.
[Wallpaper] - Computes number of rolls of wallpaper
basing on an entered area and a
stored value of "Wallpaper Roll
Coverage Area".
- Calculate the wall area to be covered
by the entered number of rolls of
wallpaper.
[Tile] - Find the number of tiles, based on an
entered area and a user-stored Grout
Width. Repeated presses will scroll
between numbers of tiles for various
standard tile sizes (12" / 13" / 16" / 18"
/ 24" / 1" / 2" / 4" / 6" / 8" / 10").
- Calculate the area covered by the
entered number of tiles. Repeated
presses will scroll through areas
covered by various sizes of tiles.
[Deck] - Find the number of boards for a deck,
based on an entered area and a
stored Board Width.
Repeated presses will scroll between
numbers of boards for various
standard board lengths ( 8' / 10' / 12' /
14' / 16' / 18' / 20' ).
7
- Computes the area covered by the
entered number of boards. Repeated
presses will scroll through areas
covered by boards of various lengths
as shown above.
[Fence] - Multifunction key that finds the
number of fence boards, number of
posts and number of rails basing
on an entered distance, Board
Width and Post Spacing.
- Computes the fence distance by the
entered number of boards and the
stored Board Width.
[Shift][Bd Feet] - Computes number of board feet
based on entered volume.
- Compute the volume by the defined
number of board feet.
[Shift][Studs] - Computes number of studs, based on
an entered linear distance and a
stored On-Center Spacing.
- Compute the distance by basing on
the defined number of studs and the
stored On-Center Spacing.
[Shift][Roof
Bundle] - Computes number of bundles of roof
shingles, based on an entered roof
area and a stored Area per Roof
Bundle.
- Computes the roof area basing on the
entered number of bundles of roof
shingles.
8