# Black & Decker BDCAL100 Instruction Manual page 5

Marksman material estimator

[Shift][4x8
Sheet]
-
Computes number of 4'X 8' sheets,
based on entered linear distance or area.
-
Computes the area or the distance by
basing on the defined number of "4X8"
sheets.
[Shift]
[Carpet]
-
Computes carpet length required (of
either 12', 13' or 15' wide carpet rolls),
based on entered area. Repeated
pressings of [Shift][Carpet] will scroll
through values for 12', 13' and 15' rolls.
-
Computes the floor area with the given
length of carpet
[Shift][Custom
Tile]
-
Computes number of tiles based on an
entered area and a stored Custom Tile
Size. This is used separately from the
regular Tile key.
-
Compute the area by basing on the
defined number of tiles.
[Shift]
[Concrete]
-
Computes the number of bags of
concrete required, based on an
entered volume and a stored Volume
per Bag.
-
Computes the volume by entering the
number of bags of concrete.
[Shift][Brick] -
Computes the number of standard
8-inch-size U.S. bricks based on entered
linear distance (or area, or volume).
Finds values for both "face" (21 square
inches) and "paver" (32 square inches)
9
brick applications. By pressing
[Shift][Brick] again consecutively, it will
toggle back and forth between "face",
"paver".
[Shift][Block] -
Computes the number of standard
128-sq. inch blocks, based on an
entered linear distance or area and a
stored Block Area.
[Shift][Gravel] -
Computes tons of gravel required,
based on an entered volume and a
stored Weight per Volume.
-
Given the quantity of gravel used,
calculate the volume.
[Shift][Cost \$] -
"Cost" function lets you compute total
material cost, given an entered Per
Unit Cost.
[Shift][Mulch] -
Computes the number of bags of mulch
you'll need, based on an entered
volume and a stored Volume per Bag.
-
Computes the volume by basing on
the number of bags of mulch.
10