Press [Recall][Brick] to toggle between paver brick and
To store a custom value into the user-programmable
variables shown above, one should input the value in the
defined unit as listed above, then press [Store] which is
followed by the corresponding variable key button.
For example, set the Paint Coverage per Gallon to 400.
400 [Feet] [Feet]
FEET / GL
Press [Clear All] to clear all stored values and set
estimator back to defaults.
NOTE: Changing default value will impact material
V-i. Fraction Resolution
By default, the estimator is set to display fractional values
to the nearest 16
of an inch. The 1/16 resolution can be
displayed by pressing [Recall][x/y].
Repeated presses of [x/y] will then scroll through the
available settings: 1/16, 1/32, 1/64, 1/2, 1/4 and 1/8. The
last setting appears on the screen will be stored as the
current fractional resolution.
When there is fraction displayed after calculation, you can
press [x/y] to toggle between the highest fractional
resolution and the set resolution. For example,