Miele CVA6405 Operating And Installation Instructions page 71

^ Slide the hoses back onto the angle
section and reinsert it. Make sure that
the bridge on the angled section
faces down.
^ Reinsert the air intake hose into the
opening c.
Step 3: Cleaning the milk
pipework in the main
dispenser
^ Remove and disassemble the
dispensing unit as described in
"Cleaning and care – Main
dispenser".
^ Rinse all parts carefully under
running water.
Use the cleaning brush to clean all
parts carefully. Do not use a needle
or similar object to avoid piercing
the silicone parts.
^ Reassemble the dispensing unit and
reinsert it into the main dispenser.
^ Replace the cover.
Cleaning clogged milk pipework
Step 4: Milk valve maintenance
^ Tap x .
^ Tap the arrow key Y until
"Maintenance" is highlighted.
Tap the OK button.
^ Tap the arrow keys until "Condition
milk valve" is highlighted. Tap the OK
button.
The milk valve will go into maintenance
position.
Important! Before you confirm
"Leave maintenance position" with
"OK", you must remove the cleaning
brush. Otherwise, the coffee
machine will be damaged.
^ Insert the brush into the milk valve.
Move the brush back and forth.
^ Tap the OK button.
The milk valve will move into the stan-
dard position and the milk lines are
rinsed.
71