Proper Care And Cleaning Of The Bread Factory Plus """""""""""""16 - Sanyo SBM - 20 Instruction Manual

Automatic breadmaker
Hide thumbs Also See for SBM - 20:
Table of Contents

Advertisement

PROPER CARE AND CLEANING OF THE
BREAD FACTORY PLUS
* (_lnplug the power cord and allow
Caution: Do not pour water into the
the breadmaker
to cool completely.
inner case or submerge the breadmaker
in water.
* Use only a mild detergent
to clean the breadmaker. To avoid damaging the smooth
surfaces of the breadmaker
and inner pot, do not use chemical kwid
cleaners (such
as benzene or thinners),
nonabrasive
or abrasive cleansers, or scrubbing
brushes or
pads to clean the breadmaker
or inner pot surfaces.
Tha Outar Body, Lid and Innar Caae
. Wipe the outside and the lid with a damp cloth.
Remove any flour, bread crumbs or other materials
from
case using a damp sponge or cloth or a small, portable
Tha Inner Pot and Kneader
Blade
the inside of the
vacuum
cleaner.
inner
Both the inner Dot and the kneader blade are coated with a nonstick
surface. DO
not use any cleaners or utensils thet could scratch
this surface.
The nonstick surface may change in appearance after continued use. This is caused
by moisture
and steam and has no effect
on its use or quality.
Remove the inner pot with kneader blade from the inner case and wash with a
damp sponge or dish cloth, making sure the kneader blade mounting
shaft is also
vew
clean. The inner pot interior can be washed
with soapy water, but do not
submerge
inner pot in water. Wash after each use and dry thoroughly.
DO not soak either part in water
or wash in a dishwasher.
If it is difficult to remove the kneader blade from the inner pot, fill the inner pot
with warm
water
and let it stand a few minutes
to allow any baked-on
dough to soften.
If the hole in the kneader blade becomes clogged, clean it out with a soft
brush or wooden
or plastic toothpicks.
Before storing
the Breadmaker
bread
bristle
Make
sure the breadmaker
has cooled completely
and all parts have been
thoroughly
cleaned and dried.
Leave the lid open until the breadmaker
is completely
cool. This will avoid the
formation
of any moisture
in the inner case.
–16–

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents