Digital Alert Systems DASDEC-1EN Quick Start Manual page 39

3) In the field next to Outgoing Email Server Name (circled in red) enter the IP address of
the SMTP server (note – you can not use the server name, such as
"outgoing.mailserver.com" unless you have enabled DNS in the DASDEC-II network setup).
In the field by From Name (circled in blue) enter the e-mail address you want messages
from the DASDEC-II to be from.
4) Next click on the button "Set & Test Mail Server & From Names". If your settings are correct
you'll see a graphic reading "OK: Contacted Mail Server".
5) If your server IP address is incorrect or you are trying to use a name without DNS you'll see:
6) After setting the E-Mail Server click on the tab for "Event Email" (circled in red).
Quick Start Guide for Your DASDEC II Page 39 of 40