Step 7 - Alert Encoding And Originating - Digital Alert Systems DASDEC-1EN Quick Start Manual

Step 7 – Alert Encoding and Originating
Before the DASDEC-II can be used to originate alerts such as weekly and monthly tests the
Encoder must first be configured.
1) Log into your DASDEC-II by launching an Internet browser and typing the IP Address of your
DASDEC-II into the browsers address bar. Enter the User Name "Admin" and then enter the
password for the Admin account. Then click the "Login" button.
2) After logging in Click on the "Setup" tab (circled in red), then click on the "Encoder" radio
button (circled in blue) and then click on the tab "General" (circled in green).
Under the heading EAS Origination select "EAS-Broadcast Station/Cable System".
Quick Start Guide for Your DASDEC II Page 27 of 40