Step 6 - Alert Decoding, Filtering & Forwarding - Digital Alert Systems DASDEC-1EN Quick Start Manual

Step 6 – Alert Decoding, Filtering & Forwarding
By default the DASDEC-II monitors for all alerts sent to all areas and will make all of those
alerts available for forwarding. Changing the alert filters for will affect the alerts that are
available for forwarding to your individual station interfaces, which will be setup later.
Determine which counties this DASDEC-II will serve and which EAS Event codes your
stations will forward.
1) Log into your DASDEC-II by launching an Internet browser and typing the IP Address of your
DASDEC-II into the browsers address bar. Enter the User Name "Admin" and then enter the
password for the Admin account. Then click the "Login" button.
2) After logging in Click on the "Setup" tab (circled in red), then click on the "Decoder" radio
button (circled in blue) and then click on the tab "Forwarding" (circled in green).
3) In the Forwarding EAS Station ID box, type the name of your station in the ID form that you
want.
Quick Start Guide for Your DASDEC II Page 22 of 40