Table of Contents
Advertisement
Description of each menu
FUNCTION
Wall Screen
Aspect Ratio
Keystone
Position
Phase
H. Size
Magnify
3D
3D Sync
Downloaded From projector-manual.com Mitsubishi Manuals
DESCRIPTION
Corrects the projected picture's color when the projection surface is not
white. See
"Using Wall Screen" on page 28
There are four options to set the image's aspect ratio depending on your
input signal source. See
"Selecting the aspect ratio" on page 25
details.
Corrects any keystoning of the image. See
24
for details.
Displays the position adjustment page. To move the projected image, use
the directional arrow keys. The values shown on the lower position of the
page change with every key press you made until they reach their
maximum or minimum.
Adjusts the clock phase to reduce image distortion.
Adjusts the horizontal width of the image.
Magnifies or reduces the projected image. See
searching for details" on page 24
This projector features a 3D function which enables you to enjoy 3D
movies, videos, and sporting events in a more realistic way by presenting
the depth of the images. You need to wear a pair of 3D glasses to view the
3D images.
•
For a PC type signal:
When the vertical frequency is 120Hz, and the content being projected is
made with 3D technology, selecting On will present the 3D images.
•
For a video type signal:
When the content being projected is made with 3D technology, selecting
On will present the 3D images.
When the 3D function is on:
• The brightness level of the projected image will decrease.
• The Setting cannot be adjusted.
• The Keystone can only be adjusted within limited degrees.
• The Magnify can only magnify the pictures to limited sizes.
When you discover the inversion of the image depth, enable this function
to correct the problem.
for details.
"Correcting keystone" on page
"Magnifying and
for details.
for
EN-39
Advertisement
Table of Contents
