Table of Contents
Advertisement
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in 4:3 ratio,
which is the default for this projector, and digital TV and DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and
scale the image output to a different aspect than that of the image input signal.
To change the projected image ratio (no matter what aspect the source is):
1.
Press MENU/EXIT and then press
2.
Press
3.
Press
About the aspect ratio
In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be
displayed on those unused black areas.
1.
Auto: Scales an image proportionally to fit the projector's native
resolution in its horizontal width or its vertical height. This is suitable
when you want to make most use of the screen without altering the
image's aspect ratio.
2.
4:3: The image is projected as its original resolution, and resized to fit
within the display area. For input signals with lower resolutions, the
projected image will display smaller than if resized to full screen. You
could adjust the zoom setting or move the projector towards the screen to
increase the image size if necessary. You may also need to refocus the
projector after making these adjustments.
3.
16:9: Scales an image so that it is displayed in the center of the screen
with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer
monitors, standard definition TV and 4:3 aspect DVD movies, as it
displays them without aspect alteration.
4.
Real: Scales an image so that it is displayed in the center of the screen
with a 16:9 aspect ratio. This is most suitable for images which are
already in a 16:9 aspect, like high definition TV and 16:9 aspect DVD
movies, as it displays them without aspect alteration.
5.
Full: Scales an image to full screen size (16:10). The image is projected
to fit all over screen.
Downloaded From projector-manual.com Mitsubishi Manuals
to highlight Aspect Ratio.
/
to select an aspect ratio to suit the format of the video signal and your display requirements.
/
until the DISPLAY menu is highlighted.
4:3 picture
16:9 picture
16:10 picture
4:3 picture
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture
EN-25
Advertisement
Table of Contents
