Advertisement
Transmitter Programming Guide
BUTTON
1.
Enter the vehicle and turn the ignition key to the ON position.
2.
Press and release the programming switch 3 times.
The parking lights will flash 1 time, indicating the system is ready to accept
programming for LOCK.
3.
Press and hold the LOCK icon button on the transmitter you wish to program for 4
seconds or until you see a long flash of the parking lights.
Repeat step 3 for each additional transmitter you wish to program.
4.
Turn the ignition key to the off position and test the functions on the transmitters
SYSTEM FUNCTION
Lock - System will Lock the doors.
Unlock - System will Unlock the doors.
Trunk Release or optional device
connected to channel 3.
When pressed and release two times,
will provide pulsed output or activate the
Remote Start option when installed.
Model CATX520
Programming Guide
.
Advertisement
Table of Contents
Related Manuals for Code Alarm CATX520
Summary of Contents for Code Alarm CATX520
-
Page 1: Programming Guide
Model CATX520 Programming Guide Transmitter Programming Guide BUTTON SYSTEM FUNCTION Lock - System will Lock the doors. Unlock - System will Unlock the doors. Trunk Release or optional device connected to channel 3. When pressed and release two times, will provide pulsed output or activate the Remote Start option when installed. - Page 2 Model CATX520 Programming Guide Changing the Remote Control Battery The 12-volt alkaline battery supplied in your remote transmitter should last approximately one year, depending on usage. When the battery begins to weaken, you will notice a decrease in range, or the distance from your vehicle that your remote transmitter will operate.
Need help?
Do you have a question about the CATX520 and is the answer not in the manual?
Questions and answers