Yamaha YZF-R1(P) 2002 Service Information page 39

C Clamp the air cleaner drain
hose, fuel tank breather hose,
drain hose, AI system hose, AI
system lead and AC magneto.
Route the air cleaner drain hose,
fuel tank breather hose and drain
hose outside the AI system
hose, AI system lead and AC
magneto lead. Route the fuel
tank reserve hose and fuel tank
drain hose underneath AC mag-
neto lead and AI system lead
and then to the outside.
D House all the leads in the rib of
the box battery.
34
CABLE ROUTING
E Clamp the oil level gauge, side
stand switch lead and radiator
hose.
F Place the oil level gauge, side
stand switch lead and radiator
hose in the drive sprocket cover.
G Do not pinch the hose.
H Pass the oil level gauge lead and
sidestand switch lead by the in-
ner side of the coolant hose.
I Route the fuel tank breather
hose and fuel tank drain hoses
through the clamp and pass by
the outside of the bottom cowl-
ing. Make the end length of
hoses even.
2-43
SPEC
J Pass the fuel tank breather hose
and fuel tank drain hose by the
inner side of the coolant hose.
Do not pinch each hose in the
bottom cowling cowl mounting
section.
K Pass the air cleaner drain by the
inner side of the coolant hose
and release under the coolant
hose. However, do not place out
side of the bottom cowling.
L Route the air cleaner drain hose,
fuel tank breather hose, fuel tank
drain hose, AI system hose and
AI system lead through the
clamp.
M To turn signal light.