How To Replace The Led1W Source - opto engineering LTCLHP series Instruction Manual

LTCLHP | instruction manual

2.4 How to replace the LED1W source

When you receive LED1W source, in the package you will find the following items:
LED1W: LED source
component
2.4.1 Replacement instructions
Follow these steps to properly replace LED1W source.
1
Turn off LTCLHP and disconnect
the power cable.
5
Unplug the connector.
v 1.1
LED centering tool allows
to easily position and center
LED1W light source.
2
Unscrew the LTSCHP module from the
LTCLHP illuminator.
6
Unscrew and remove the old
LED1W source.
3
Remove any external spacers.
Follow steps 1 to 12 of LTSCHP assembly procedure (section
2.2.2) to complete the replacement.
LED1W source
4
Unscrew and disconnect the rear
part from the LED support.
9