Ce Conformity - opto engineering LTCLHP series Instruction Manual

LTCLHP | instruction manual

3. CE Conformity

Opto Engineering declares the products of the LTCLHP and LTSCHP series compliant with
the provisions of the Community Directive 2004/108/CE EN 61326-1 (measuring devices and
control laboratory) including all applicable amendments, and that all standards and/or technical
specifications mentioned below have been applied:
Method
CEI EN 61326-1:2007-03
CEI EN 55011:2011-02
CEI EN 61000-4-3:2007-04
CEI EN 61000-4-3/A1:2009-01
CEI EN 61000-4-3/A2:2011-01
CEI EN 61000-4-3/ISI:2010-05
CEI EN 61000-4-2:2011-04
DISCLAIMER
Specifications within this document are subject to change without notice. Photos and pictures are for illustration purposes only and may differ from the real product's appearance.
v 1.1
Title
Electrical equipment for measurement, control and laboratory use
EMC requirements.
Part1: General requirements
Industrial, scientific and medical (ISM) radio-frequency equipment.
Electromagnetic disturbance characteristics, Limits and methods of measurement
Electromagnetic compatibility (EMC)
Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency,
electromagnetic field immunity test
Electromagnetic compatibility (EMC)
Part 4-2: Testing and measurement techniques-Electrostatic discharge immunity test
10