How To Replace The Ltschp Module - opto engineering LTCLHP series Instruction Manual

LTCLHP | instruction manual

2.3 How to replace the LTSCHP module

When you receive LTSCHP module, in the package you will find the following items:
LED support (gray color)
Rear part (red color)
LED1W: LED source
component
LED source axial position is an important operational parameter: make sure to follow the
instructions in the next section to obtain optimal illumination homogeneity.
!
Make sure to perform this procedure in a clean, non-dusty environment in order to prevent dust
or other particles from entering your LTCLHP illuminator
v 1.1
Spacers kit: includes the spacers and screws you need to
correctly configure LTSCHP1W for your specific LTCLHP model
Power cable
LED centering tool
to easily position
and center LED1W-x light
source
LTSCHP module
6