Dns Server Setup Page - Panasonic PT-D5600E Operating Instructions Manual

Using Web Browser Control
E-mail setup page (continuing)
Select the conditions for sending the second E-mail.
ERROR: an error is detected by self-diagnosis.
LAMP RUNTIME: remaining lamp service time has reached the value set in the field.
INPUT AIR TEMPERATURE: intake air temperature has reached the value set in the field.
Note • Only alphanumeric characters, ".", "_", "-", or "@" are available to set an e-mail address.
DNS server set up page
Click [Network set up], then [DNS server set up] to display the DNS server set up page.
50
Downloaded From projector-manual.com Panasonic Manuals
Enter the E-mail address to
which the E-mail is to be sent
when two E-mail addresses
are going to be used. Do not
enter it when the second E-
mail address is not going to
be used.
Check these boxes when E-
mail is to be sent periodically
to two E-mail addresses. E-
mail will be sent at the times
and on the days checked.
Button to update settings
Primary DNS server
address
Available input characters:
Numbers (0 - 9), period (.)
(ex. 192.168.0.253)
Secondary DNS server
address
Available input characters:
Numbers (0 - 9), period (.)
(ex. 192.168.0.254)
Button to update settings