Aiwa XR-MK7 Service Manual page 44

QQ
3 7 63 1515 0
Pin No. Pin Name
77 DATO
78 XLTO
79 CLKO
80 MIRR
Notes)
• The 64-bit slot is an LSB first, two's complement output, and the 48-bit slot is an MSB first, two's complement output.
• GTOP is used to monitor the frame sync protection status. (High: sync protection window open.)
• XUGF is the negative pulse for the frame sync obtained from the EFM signal. It is the signal before sync protection.
• XPLCK is the inverse of the EFM PLL clock. The PLL is designed so that the falling edge and the EFM signal transition point
coincide.
• GFS goes high when the frame sync and the insertion protection timing match.
• RFCK is derived from the crystal accuracy, and has a cycle of 136µ.
• C2PO represents the data error status.
• XRAOF is generated when the 32K RAM exceeds the ±28F jitter margin.
TE
L 13942296513
www
.
http://www.xiaoyu163.com
I/O
O Serial data output to SSP.
O Serial data latch output to SSP. Latched at the falling edge.
O Serial data transfer clock output to SSP.
Mirror signal input. Used when the number of tracks is 128 or more for the 2N-track
I
jump and M track move of the auto sequencer.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Description
Q Q
3 6 7 1 3 1 5
co
.
64
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9