HIKVISION DS-2CD7133-E Installation Manual page 12

Installation Manual of Network Mini Dome Camera
your need.
Loosen the lens set screws
NOTE：
 As the lens of camera has
already been factory adjusted
to the best imaging effect, thus
it only needs to adjust the pan
and tilt view angle.
 If the image is not clear
without the back box, please
don't worry, the back box will
affect the imaging effect, so
when you test the imaging
effect of lens, the back box
must be
camera.
4. Tighten the set screws, and install the back box.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
Adjust horizontally and vertically the camera's
installed to the
pan and tilt for your need
Tighten the lens set screws
6