Software Control - Using Lightware Matrix Controller; Installing The Matrix Controller Software - Lightware HDMI-OPT-TX200R User Manual

5. Software control – Using Lightware Matrix Controller
The device can be controlled using Lightware Matrix Controller from a Windows PC or
Laptop through USB connection.

5.1. Installing the Matrix Controller software

Step 1. Run Installer_LW_matrix_controller_vXXX.exe
Step 2. Select destination folder and click Install (Using the default path is highly
Step 3. If you want to create desktop icon click Yes in the next pop-up window:
Step 4. After finishing the installation the following message appears:
Uninstalling
To uninstall the control software click on: Start menu  Programs  Lightware 
Uninstall_LW_matrix_controller_vXXX.exe
Section 5. Software control – Using Lightware Matrix Controller
recommended)
HDMI-OPT-TX and RX family
User's Manual
Page 31 / 60