Axis 2100 User Manual page 32

Using Your Camera with a Modem
30
Refining the Dial-up Networking Properties...
Having created the Dial-up connection for your AXIS 2100, follow the steps below to refine the
connection properties:
From the Dial-up Networking dialog, right click the
dedicated Dial-up connection previously created for you
camera (AxisCamera was the connection created used in
this and previous examples). Select Properties.
Click the Server Types tab. From
the drop-down dialog, select PPP as
the Type of Dial-Up Server.
In the Advanced options field,
check Enable software
compression. All other check boxes
should remain unchecked.
In the Allowed network protocols field,
check the TCP/IP check box. NetBEUI and
IPX/SPX check boxes should remain
unchecked.
AXIS 2100 User's Guide
Click TCP/IP settings and then
check the Server assigned IP address,
and Server assigned name server
addresses radio buttons.
Check the Use IP header
compression and Use default
gateway on a remote network
check boxes. Click OK.
7
Click the Scripting tab and ensure that the Start
terminal screen minimized check box is checked. Click
OK to exit Dial-Up Networking Properties.