3. Location and Identification of Parts
This chapter describes the ScreenLifter without display. Please note that the dimensions with the display
installed may deviate substantially from the dimensions specified below. Please refer to the appendix for
more detailed specifications.
1.
Cap
2.
Lifting columns
3.
Column frame
4.
Display frame
5.
Bracket with pivot bearing
6.
Sliding rails and sliding bearings
7.
Transport attenuators
8.
Transportation pins for lifting and lowering the cap
9.
Fork for admission of the pins
10.
Rubber stoppers for the rotating motion
11.
Power connection for ScreenLifter and display
12.
ON-/OFF Switch
13.
Connector for optional cable remote control
14.
Runners of the lifting columns
15.
Control panel
16.
Retainer pin (notched pin) for rotating display
17.
Helix cable for power supply of the display
18.
Type label
19.
Switching contact on the lower surface of the cap
6