2. Safety Precautions
These safety precautions must be observed minutely! If the system is inappropriately
operated it may cause material damage which could result in possible injury!
•
Read the operating instructions and all safety precautions carefully before first set-up.
•
Keep the operating instructions for later reference.
•
Before operating the system, make sure that the operating voltage of the system corresponds
with the local power supply. (Check type label!)
•
Opening or exchange of electrical components may only be carried out by qualified technical
personnel or the manufacturer.
•
In case of malfunctions like, e.g., smoke, smell or unusual noises, switch off all system
components and disconnect all power connections.
•
The maximum operating duration of the lifting column engines as stated on the type label must
never be exceeded.
•
Any overall changes, control changes, changes of control elements or the position switches etc.
are prohibited.
•
The ScreenLifter may not be operated in a potentially explosive atmosphere.
•
Do not set up to the ScreenLifter outdoors. The ScreenLifter may be operated in dry rooms
only.
•
ScreenLifter and display combined weigh approx. 600 kg. When setting up the device, consider
the load-carrying capacity and condition of the surface in particular of stages and other mobile
constructions.
•
Place the ScreenLifter only on even and horizontal surfaces, since it could otherwise
overbalance when lifting or lowering the heavy display.
•
Also make sure that no hard objects such as screws, waste or similar objects lie on the surface
when setting up the display, since this could impair stability.
2