Operating Instructions; General; Lcd Display - Panasonic G600 Service Manual

3

OPERATING INSTRUCTIONS

3.1

General

This section provides a brief guide to the operation and facilities available on the G600 handportable unit. Refer to
the Operating Instructions for full operational information.
3.2

LCD Display

The G600 handportable unit has a graphical chip on glass liquid crystal display in conjunction with the following
icons:
Figure 1: LCD display
T Indicates received signal strength: T strong signal area;\ weak signal area.
S
Indicates that it is possible to make an emergency call.
Menu The number of the feature pointed to by the pointer. To access a feature enter the menu number on
Number the keypad.
Displays the battery charge level: H Battery is at full charge; K Battery
requires recharging;
H
G The battery icon flashes during charging. During car mount use, when the battery is fully
charged, the battery icon will not light.
Displays a small icon related to the current status of the telephone:
Y telephone is roaming on a none home network;
t using the "Call Divert" feature or the telephone has Call Divert set; u Call Divert profile 1 is set;
] shows that the vibration alert is switched on;
[ shows that telephone is in silent mode - no tones;
N indicates there are unread Short Text Messages (SMS.). Lit when SMS area is full;
Menu
Icon
O the telephone is locked;
U shows that normal character have been entered in Alpha Entry;
V shows that Greek character have been entered in Alpha Entry;
W shows that extended character have been entered in Alpha Entry;
X shows that numbers have been entered in Alpha Entry.
p
Indicates that the navigation key (g) can be pressed. Each arrow will light individually to indicate
which direction is valid.
Option
Pressing the select key (B) will select the option displayed in the option area of the display.
Area
Following some operations the display will automatically clear after three seconds or after pressing any key except
E.
MCUK980101C8
Service Manual
http://cxema.ru
Menu
Number
Section 3
3 - 1
OPERATING INSTRUCTIONS
Option
Area
600-0301
Issue 1
Revision 0