Electrical System - Indmar 5.7L Vortec Operator's Manual

Hide thumbs Also See for Indmar 5.7L Vortec:
Table of Contents

Advertisement

TRANSMISSION
ZF Hurth In-Line
ZF Hurth In-Line
ZF Hurth In-Line
ZF Hurth V-Drive
ZF Hurth Ski-Vee
Walters V-Drive
Do not overfill the transmission. Overfilling
can damage the transmission. Damage to
your transmission due to too much or too
little fluid is not covered by your warranty.

ELECTRICAL SYSTEM

All Indmar engines are equipped with a 35 A circuit
breaker (1, Figure 6-14) to protect the engine electrical
system and components from overload. If the engine will
not crank with the battery switch in the ON position,
locate the red breaker reset button at the back of the
engine. Firmly push the red button until the breaker
resets (an audible click will be heard). Start the engine.
Indmar Marine Engines
MODEL
RATIO
ZF 45 D
1:1
ZF 45 A
Various
ZF 63 A
1.5:1
ZF 63 IV
--
ZF 45 IV
1:1.462
RV-26D-71V
--
CAPACITY
1.7 qt (1.6L)
2.12 qt (2L)
4.2 qt (4L)
4.2 qt (4L)
2.12 qt (2L) Main Gearbox
1.0 qt (1.06L) V-Drive Unit
0.5 qt (0.5L)
Figure 6.14 – Breaker Reset Button
FLUID TYPE
Pennzoil Dexron II, III or MERCON
Pennzoil 15W40
Pennzoil 15W40
Pennzoil 15W40
Pennzoil Dexron II, III or MERCON
Pennzoil Dexron II, III or MERCON
Pennzoil SAE 30 Motor Oil
2
1
INDM-A029
6-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents