Table of Contents
Advertisement
Additional features
Air Circulation Mode
Circulates the room air without cooling or heating.
1. Press the Start/Stop button. The unit will respond with a beep.
2. Open the door on the remote controller. Press the Air Circulation button. Close the door on the remote
controller. Now each time that you press the Indoor Fan Speed Selector, the fan speed is shifted from
low to CHAOS and back to low again.
NOTICE
CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically changed from
high to low or vice versa, depending on the ambient temperature.
Auto Clean (Optional)
1. Whenever you press the Auto Clean button, Auto Clean Function will be reserved and
AUTO CLEAN
cancelled.
2. Auto Clean function works before and after cooling or dehumidification mode. For
details, refer to the below points.
3. When the unit is started after the reservation of Auto Clean ,the Cool Start function
operates and indoor Fan is started after 20 seconds.
4. When you press Start/Stop button to turn off the unit after the you have reserved Auto
Clean function, the air-conditioner circulates the indoor air in the Auto Clean mode with
no more Cooling or Dehumidification operation. For Cooling only model, it lasts for 30
minutes for Heat pump model, for 16 minutes.
5. If you press the auto clean button again during the product operation , Auto Clean
function will be cancelled.
NOTICE
❏ During Auto Clean function, moistures left in indoor units after Cooling Operation or Healthy
Dehumidification Operation can be removed.
❏ During Auto Clean function, only Start/Stop button, Plasma button and Auto Clean button are
available.
18 Wireless Remote Controller
CHAOS Air
Fan speed is on low.
Fan speed is on medium.
Fan speed is on high.
Advertisement
Table of Contents
