Part Identification Chart - Club Weider 550weight bench User Manual

Part Identification ChartÑModel No. WEBE29300
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the Part List in the center of this manual. The number following the
key number is the quantity needed for assembly. Note: Some small parts may have been pre-attached. If a
part is not in the parts bag, check to see if it has been pre-attached.
M10 Large Washer (58)Ð6
M6 x 16mm Screw (61)Ð6
M8 x 16mm Screw (50)Ð2
M10 x 20mm Bolt (26)Ð2
M8 x 25mm Bolt (53)Ð2
M10 x 30mm Bolt (38)Ð2
M10 x 45mm Bolt (40)Ð3
M8 x 55mm Bolt (70)Ð1
M8 Flat Washer (67)Ð2
M10 Small
Washer (6)Ð18
M8 Nylon Locknut
(54)Ð4
M10 x 80mm Bolt (41)Ð24
M10 x 75mm Bolt (39)Ð2
M10 x 70mm Bolt (85)Ð1
M8 x 70mm Bolt (30)Ð1
M10 x 65mm Bolt (56)Ð9
M6 x 65mm Screw (62)Ð4
M10 x 60mm Carriage Bolt (64)Ð2
5
M6 Washer (81)Ð4
M10 Nylon Locknut
(11)Ð46
R0800A