Trane AquaStream CGWN 205 Installation Operation & Maintenance page 36

36
Installation
When ordered, the outdoor air
sensor electronics is factory-mounted
and wired. It is located inside the
control panel. The IPC bus is factory-
wired also.
Figure 22 - CGWN and CCUN main power supply connection (205-211)
Figure 23 - CGWN and CCUN main power supply connection (212-215)
The sensing bulb is extended, on the
sensor side, outside the unit. These
wires can be spliced with two
0.75mm. type or similar wires, with a
maximum of 305 meters. Splice at
sensor end must be water tight.
1Q10
L1
L2
L3
1Q10
CG-SVX06D-E4
L1
L2
L3
L1
L2
L3