Using The Controller In Independent Mode With The Motorized Head; Profile Selection Menu; Landscape Mode; Portrait Mode - Kolor PANOGEAR PACK User Manual


Read Session: Import the controller's data (already conducted sessions) then save it under an XML file format so that you can
reuse it with Autopano. (See using session files (XML) with Autopano section).

Write USB Data: Save your profiles on the controller's memory.

4. Using the controller in independent mode with the motorized head


Verify that your controller is connected to the motorized head then turn the head on. There will be a
start-up screen displayed for 5 seconds indicating the version of the software (e.g. 1.0).

Attention: For the autonomous touch screen controller to function correctly, the material profile must
already be saved in the memory. (See using the software section).

1. Profile selection menu


Use the up/down arrows to select your profile then use the right arrow to access the next menu.

The screen displays, in order :
1. The profile name (Canon)
2. The focal length (0018)
3. The camera orientation (Portrait (P) or Landscape (L))
4. The lens model (Standard (S) or Fisheye (F))
5. The trigger mode ((W)-wire or (Infrared))
6. The camera model uniquely in infrared mode ((C)-Canon, (P)-Pentax/Samsung, (N)-Nikon etc.)

2. Landscape mode


Indicate the selected camera orientation: portrait or landscape.

The parameters are displayed; the last four numbers represent the distance needing to be used for
the montage at the Nodal point.

In daylight, the retro lighting can be deactivated.

The battery symbol has four levels. Level 1 indicates that you have about 1500 possible actions (with the Li-Ion batteries),
750 (with AA batteries).

Click on the right arrow to access the next menu or on the left arrow to return to the previous menu. The motorized head
moves slightly to measure the battery life.

3. Portrait mode


Indicate the selected camera orientation: your camera must be mounted as indicated on the design.
Cf: Landscape mode.

Click on the right arrow to access the next menu or on the left arrow to return to the previous menu.

4. Horizon level


Adjust the motorized head's horizontal position using the screen's up/down arrows.

Click on the right arrow to access the next menu or on the left arrow to return to the previous menu.
Panogear Pack | User Manual
8