The Viewpoint: Spherical, Cylindrical, Mosaic; Operation Parameters; Operations Menu - Kolor PANOGEAR PACK User Manual

5. The viewpoint: spherical, cylindrical, mosaic


Select panorama, angle, or mosaic mode by pressing the symbol or by clicking on the left arrow to
return to the previous menu.

Panorama mode:
1. You will be taken directly to the operating shooting screen, no other entry is needed.

Angle mode:
1. Using the arrows, shift the motorized head to the center of the panorama.
2. Click the right arrow to access the following menu or the left arrow to return to the
previous menu.
3. Using the horizontal arrows, select the horizontal angle of the panorama (1) then the
vertical angle of the panorama (2). The screen will indicate the minimum angle
4. Click on the right arrow to access the following menu or on the left arrow to return to
the previous menu.

Mosaic mode:
1. Define your shooting scene.
2. Using the four arrows, shift the motorized head to the bottom left corner of the desired
field of view. The mosaic will begin at this point.
3. Click on the right arrow to access the following menu or on the left arrow to return to
the previous menu.
4. Using the four arrows, shift the motorized head to the top right corner of the desired
field of view. The mosaic will end at this point.
5. Click on the right arrow to access the following menu or on the left arrow to return to the previous menu.

6. Operation parameters


Using the top arrows, select the desired number of shots for each pose. (0-99)

Using the middle arrows, select the time lapse. (0-99 seconds)

Using the bottom arrows, select the desired overlap. (0%-50%)

Using the touch at the bottom right, you can have a glimpse before taking the shot.

Click on the right arrow to begin.

Start the shot by pushing on the right arrow or push on the left arrow to return to the previous
menu.

7. Operations menu


On top: the number of rows/columns of images (e.g.002)

Above the progress bar: The number of conducted images/ the total number of images.

The XXX information (e.g.008) shows the number of sessions that will be saved as XML data.

The touch "II" pauses. Press the right arrow to start the session again or press the left arrow to stop
the session and return to the software's settings menu.
Panogear Pack | User Manual
9