Installing Your Controller/Receptor; Using The Touch Control Panel; Installing The Driver - Kolor PANOGEAR PACK User Manual

1. Insert the L-bracket into the motorized head's crown to set it in place.
2. Make desired adjustments.

1. Attach the simple bracket to the L-bracket using the fixation screw then attach your camera to the simple
bracket.
2. Make desired adjustments.

Practical advice: Certain lenses and telephoto lenses include a tripod attachment. You can place this attachment directly on
the simple bracket. Stability is enhanced when the load is balanced and you will be able to move more freely.

Use the trigger cable from the pack to connect your camera to the
motorized head. To do so, connect one end of the cable to the
head's SNAP jack and the other to your camera's "Remote" jack.

3. Installing your controller/receptor


Touch Control Panel
1. Install the driver and the drive software using the provided installation CD.
(rf: chapter Using the touch control panel)
2. Connect one end of the provided cable to the controller, then connect the opposite end to the AUX jack on the motorized head.

Bluetooth module
1. Connect your transmitter to the AUX jack on the head.

3. Using the touch control panel

Panogear Pack | User Manual
On the simple bracket and the L-bracket

1. Installing the driver


Connect the controller to your computer using your mini-USB cable. Your
controller displays "USB;" but the screen does not light up.
installation CD. Your computer will alert you of the newly detected material.

According to each version of Windows, the dialogue windows may differ
slightly. You will need to reject the automatic driver search and manually choose the driver folder on
the CD. Windows will then automatically install the driver and confirm that the controller has been
detected.
Insert the
6