Energate Z100 P2 Operating And Installation Manual
  1. Manuals
  2. Brands
  3. Energate Manuals
  4. Thermostat
  5. Z100 P2
  6. Operating and installation manual

Energate Z100 P2 Operating And Installation Manual

Smart thermostat
Hide thumbs
Table of Contents

Advertisement

Quick Links

Z100 P2 Smart Thermostat
Operating and

Installation Manual

AW000655-C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z100 P2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Energate Z100 P2

Summary of Contents for Energate Z100 P2

  • Page 1: Installation Manual

    Z100 P2 Smart Thermostat Operating and Installation Manual AW000655-C...
  • Page 2 Page 2...
  • Page 3 Operating and Installation Manual Congratulations on the purchase of your new thermostat. It has been designed for easy programming to save on energy costs and allow a comfortable living environment. Features: • Auto programming mode for your yearly heating and cooling needs •...

  • Page 4: Table Of Contents

    Table of Contents    OPERATING THE THERMOSTAT ....................7   Navigating the Controls ........................7   Home Screen ..........................8   Heat / Cool / Fan Icons ......................10   Setpoint Value Display......................10   HELP button ..........................11   Title Bar ............................11  ...
  • Page 5   Energy Event ..........................28   Voluntary and Mandatory Energy Events ................. 29   Starting a Temporary Hold during an Energy Event ..............30   Energy Options Screen ........................ 31   Price Conservation Event ......................31   Conservation Screen ........................32  ...
  • Page 6   Setup Menu Options ........................44   Password ..........................44   Setpoint Range ......................... 45   Equipment Type ........................45   Equipment Settings........................46   Conventional Systems ......................46   Heat Pump Systems ......................47   Control Options ......................... 48  ...

  • Page 7: Operating The Thermostat

    OPERATING THE THERMOSTAT Navigating the Controls The function of the LEFT and RIGHT TAB buttons appears on the bottom of the display screen. Use the SCROLL (▲ ▼) buttons to adjust the temperature, move through the menus options, and change highlighted values. Press the MENU / SELECT (√) button to access the menu as well as to select or accept highlighted menu items.

  • Page 8: Home Screen

    Home Screen The Home screen displays current temperature and operation data. When the Home screen is in Idle mode, the backlight is on with low brightness. Please note that icons such as heat or fan are animated when the equipment is running. Note: A SETPOINT (e.g., LEAVE) is identified by a name and specifies both heating and cooling target temperatures.
  • Page 9 By just pressing any of the buttons, the Home screen becomes Active, the backlight brightens and the MODE and FAN tabs are shown. Pressing the LEFT TAB button changes the thermostat mode (COOL/HEAT/AUTO/EMERG/OFF). The available options for the thermostat mode will depend on the type of heating or cooling equipment at your home.

  • Page 10: Heat / Cool / Fan Icons

    Heat / Cool / Fan Icons Icon Description Heat mode (animated when engaged). Cool mode (animated when engaged). Auxiliary heat on (animated). More than one heat stage engaged (animated). More than one cool stage engaged (animated). Fan (animated when engaged). Setpoint Value Display The thermostat is controlling the HVAC equipment to the displayed temperature.

  • Page 11: Help Button

    HELP button The thermostat’s HELP button provides you with information on how to navigate through the individual menu screens. It will help you to quickly change settings without having to refer to this user manual; however, it does not replace this manual, so please keep this manual for future reference.

  • Page 12: Default Schedule

    Default Schedule The thermostat’s schedule is factory programmed with Energy Efficient START TIMES and SETPOINTS (listed below). Note: A SETPOINT has a pre-set name and specifies both heating and cooling target temperatures, as explained in detail in the Temperature Settings section. This default schedule may be modified as desired to meet your comfort and schedule requirements.
  • Page 13 Default Schedule (continued) SCHEDULE – Celsius Scale Mon. to Fri. Sat. & Sun. SETPOINT SETPOINT START START TIMES TIMES NAME HEAT COOL NAME HEAT COOL 6:00 am Wake 21.1°C 25.6°C 8:00 am Wake 21.1°C 25.6°C 8:00 am Leave 16.7°C 29.4°C 6:00 pm Return 21.1°C...

  • Page 14: Temporary Hold

    Temporary Hold A Temporary Hold allows you to temporarily make the temperature warmer or cooler without affecting the pre-set programming. The thermostat will remain at the Temporary Hold temperature until the next scheduled SETPOINT. From the Home screen, press either of the SCROLL buttons to adjust either the HEAT (if the current operating mode is HEAT) or the COOL (if the current operating mode is COOL) of the active target SETPOINT, shown below the room temperature, with two arrows...
  • Page 15 Temporary Hold (continued) Once the Temporary Hold is in effect, the SETPOINT name will be replaced by TEMPORARY. Note that a Temporary Hold can also be set by scrolling to the HOLD menu item at the Main Menu and selecting TEMPORARY as the Type of Hold, as it is explained further in the section describing the HOLD screen.

  • Page 16: Heating And Cooling Modes

    Heating and Cooling Modes The thermostat is pre-set for heating operation (HEAT) but, as explained when describing the HOME SCREEN, you can manually (by pressing the LEFT TAB) change the thermostat mode between AUTO, HEAT, COOL, OFF, and EMERG. The available options for the thermostat mode will depend on the type of heating or cooling equipment at your home.

  • Page 17: Main Menu

    Main Menu From the Home Screen, pressing the MENU / SELECT button once (if the screen is active) or twice (if it is in the idle mode), the MAIN MENU appears as it is shown on the left. Using the SCROLL buttons, you can scroll to the desired menu item, as shown in the two screen shots on the left.

  • Page 18: Temperature Settings

    Temperature Settings A SETPOINT is identified by a NAME and specifies heating and cooling target temperatures. Example: If the SETPOINT is set to WAKE, with COOL temperature of 78°F and HEAT temperature of 70°F, a thermostat operating in AUTO mode will keep your dwelling’s temperature at the predefined HEAT or COOL temperature.

  • Page 19: Advanced Schedule

    Advanced Schedule The Advanced Schedule menu is reached by selecting the menu item ADV. SCHEDULE on the Main Menu By pressing the MENU / SELECT button, takes you to the ADVANCED SCHEDULE menu, where you can choose one of three menu items: SCHEDULE TYPE, SETPOINTS and SCHEDULE.

  • Page 20: Schedule Type

    Schedule Type The SCHEDULE TYPE screen allows you to choose among three different weekly schedule types. These are: 5/2 DAYS Mon. – Fri. schedule is the same. Sat. & Sun. schedule is the same 7 DAYS Every day of the week has an individual schedule. Mon.

  • Page 21: Setpoints

    Setpoints The SETPOINTS screen shows on the left the list of names of the different SETPOINTS programmed in your thermostat and on the right the corresponding heating (in winter) and cooling (in summer) target temperatures. To change the HEAT and COOL temperature settings, SCROLL to the SETPOINT you want to change and press the MENU / SELECT button.

  • Page 22: Schedule

    Schedule The SCHEDULE determines when a SETPOINT such as WAKE begins. Only the start times are defined; the SETPOINT ends at the start of the next SETPOINT. From the ADVANCED SCHEDULE menu, choose the menu item SCHEDULE and press the MENU / SELECT button to view the SCHEDULE screen.

  • Page 23: Hold Screen - Permanent, Timed, And Temporary Holds

    Hold Screen - Permanent, Timed, and Temporary Holds The SCHEDULE can be overridden to maintain a desired SETPOINT through either a: • Permanent Hold (hold until cancelled) • Timed Hold • Temporary Hold (hold until the next scheduled SETPOINT) Choose HOLD from the Main Menu. Once in the HOLD screen, use the SCROLL buttons to choose the HOLD Type.
  • Page 24 Hold Screen - Permanent, Timed, and Temporary Holds (continued) Timed Hold Once you choose the TIMED hold, you can change the date and time until it will be effective, by pressing the MENU/SELECT button. The date and/or time will be respectively underlined and you will be able to change them by using the SCROLL buttons.
  • Page 25 Hold Screen - Permanent, Timed, and Temporary Holds (continued) Temporary Hold The Temporary Hold is set to override the thermostat schedule temporarily, but it will be cancelled by the next scheduled SETPOINT, as explained before in the section called Temporary Hold.

  • Page 26: Setting The Date & Time

    Setting the Date & Time When the communications link is active, the network periodically updates the date and time and you will be prevented from modifying this setting. If the communications link is off, you can set the current date and time by selecting the TIME menu item from the USER OPTIONS menu. Using the same menu item, you can also change between a 12H or 24H clock format.
  • Page 27 Setting the Date & Time (continued) The TIME screen will appear as shown at the left. To change between 12 and 24 hour clock formats, scroll to the CLOCK FORMAT menu item. Press MENU / SELECT. The setting will be underlined. You can change the format using the SCROLL buttons and then pressing SAVE CHANGES to accept the change.

  • Page 28: Energy / Price Events

    Energy / Price Events Energy / Price Events are specific time intervals when your utility institutes higher energy prices, or when your utility needs to reduce the load on the electricity grid. These events are referred to as: • Energy Events •...

  • Page 29: Voluntary And Mandatory Energy Events

    Voluntary and Mandatory Energy Events An Energy Event can be voluntary or mandatory. In the case of a Voluntary Energy Event you may accept the modifications suggested by your utility, or you can either Override the event or Opt-Out of it. The Overriding of a voluntary Energy Event can be done while starting a Temporary Hold after the event has started, as will be explained in the next section.

  • Page 30: Starting A Temporary Hold During An Energy Event

    Starting a Temporary Hold during an Energy Event During an Energy Event you can always start a Temporary Hold through the Home Screen, following the procedure explained in the Temporary Hold section. In this case, when you press ACCEPT, a warning message will be displayed advising you that there is an Energy Event in progress, which are the limits specified by the event and when it will end.

  • Page 31: Energy Options Screen

    Energy Options Screen The Energy Options screen allows you to disable Voluntary Energy Events. Choose ENERGY OPTIONS from the Main Menu to view this screen. The options are: OPT-IN and OPT-OUT. To change from OPT-IN to OPT-OUT, you need to SCROLL to OPT-OUT and press SAVE CHANGES.

  • Page 32: Conservation Screen

    Conservation Screen The Conservation Screen allows you to choose your desired comfort level (i.e. from maximum comfort and no savings to maximum savings and minimum comfort). Please note that not all utilities provide price information over the communications link so this screen may not be activated for your program.
  • Page 33 Conservation Screen (continued) The Savings Comfort Level places a higher value on savings over comfort such that the temperature adjustments are greater for a given price increase. Maximum Savings means that your thermostat will change the temperature in the direction of maximum energy savings every time there is an increase in the price of energy.

  • Page 34: Indicators Of Energy Events And Savings

    Indicators of Energy Events and Savings The Thermostat has four Light Emitting Diodes (LEDs) located on the center portion of the case, below the LCD screen. These four LEDs are in order from left to right: BLUE, YELLOW, ORANGE and RED. BLUE This LED will light up when an energy event or a price conservation event is in progress.

  • Page 35: Utility Text Messages

    Utility Text Messages Your utility may send text messages to your thermostat to provide information. For example, they might inform you of upcoming events. A text message sent from your utility will be displayed when the thermostat is on the home screen. It will remain displayed until you acknowledge the message, until the message expires, or until your utility cancels the message.

  • Page 36: User Options

    User Options The USER OPTIONS menu allows you to set up the configurations of the price display, date and time, temperature and language. It also allows you to remind yourself when you have to change the filter of your equipment and also to save service information that you may need in future. Price Display Options From the Main Menu, SELECT the User Options menu item.

  • Page 37: Filter Reminder

    Filter Reminder You can program the Filter Reminder by going to the FILTER REMINDER screen from the USER OPTIONS menu. Once in the FILTER REMINDER screen you can set (in months) when you need to change the filter. It can be set from 0 to 12 months. Setting it to 0 effectively disable the CHANGE FILTER reminder.

  • Page 38: Temperature Units And Calibration

    Temperature Units and Calibration The display can be set to display Fahrenheit (°F) or Celsius (°C) scales. Also if you measure the temperature yourself and believe the thermostat’s displayed temperature is off slightly you can easily calibrate the thermostat’s display by up to +/- 5.4°F (+/- 3°C) by following these steps. From the USER OPTIONS menu select TEMPERATURE.

  • Page 39: Service Information

    Service Information Information regarding your service contractor can be programmed into the thermostat for future reference from the SERVICE screen, which can be accessed through the USER OPTIONS menu. Choose SERVICE from the USER OPTIONS menu. Press EDIT NAME and enter the name and contact information using the MENU / SELECT button to navigate to each letter position and the SCROLL buttons to change each letter.

  • Page 40: Installation And Maintenance

    INSTALLATION AND MAINTENANCE Mounting the Thermostat Install the thermostat at 5 feet (1.5m) above the floor in an area with good air circulation at average temperature. Avoid locations with drafts or dead spots behind doors, hot or cold air ducts, sunlight or radiant heat from appliances, concealed pipes or chimneys and unconditioned areas such as outside walls behind the thermostat.

  • Page 41: Removing Thermostat Front Housing From Backplate

    Removing Thermostat Front Housing from Backplate To remove the thermostat front housing from the backplate, press the plastic tab located at the bottom of the thermostat. Pull the bottom of the front housing forward and remove. Warning: do not use metallic tools when removing battery or backplate; this may damage the thermostat.

  • Page 42: Replacing The Battery

    Replacing the Battery A LOW BATTERY WARNING will appear when the battery falls below 10% of its rated capacity. This procedure does not lose the thermostat settings; however, time settings will require re- programming if communications are not restored. Replace with a CR-2032 battery. Many government agencies promote and have battery recycling programs.

  • Page 43: Wiring Configuration

    Wiring Configuration The thermostat should be wired by a licensed technician familiar with HVAC installation. Conventional System s (CONV) ommon(GND) Power (24VAC) 3 RS OUT Outdoor Sensor 1st Stage Heat W1 10 4 RS GND Sensor Ground 5 FILTER Filter 1st Stage Cool Y1 12 2nd Stage Cool Y2 13 2nd Stage Heat W2 14...

  • Page 44: Setup Menu Options

    Setup Menu Options WARNING: Changing settings in the SETUP can damage the HVAC system and should only be done by a qualified HVAC technician. Password Two levels of password protection are programmed in the thermostat: USER and INSTALLER. Both password levels will timeout after 20 minutes of the last button press and force you to re-enter a password.

  • Page 45: Setpoint Range

    Setpoint Range The SETPOINT RANGE sub menu defines the Maximum and Minimum temperatures allowed in the HEAT and COOL modes. Adjusting these temperatures limits the temperature ranges allowed when setting SETPOINT temperatures. Equipment Type WARNING: The thermostat must be configured correctly to match the equipment type. The number of cooling and heating stages must be defined in the Conventional or Heat Pump setting.

  • Page 46: Equipment Settings

    Equipment Settings Conventional Systems You must enter an Installer Password to access the EQUIPMENT SETTINGS from the Main Menu. The following settings can be changed for Conventional Systems: DEFAULT OPTION MIN ON/OFF TIME 3 MIN 1-6 MIN Minimum cycle time for the furnace/air conditioner. FAN ON IN HEAT The fan turns on when the The furnace waits until enough...

  • Page 47: Heat Pump Systems

    Heat Pump Systems You must enter an Installer Password to access the EQUIPMENT SETTINGS from the Main Menu. The following settings can be changed for Heat Pump Systems: DEFAULT OPTION MIN ON/OFF TIME 3 MIN 1-6 MIN Minimum cycle time for the heat pump/auxiliary heater. ALLOW HP+AUX ON Allows the Heat Pump and Does not allow Heat Pump and...

  • Page 48: Control Options

    Control Options You must enter an Installer Password to access the CONTROL menu from the Main Menu. The following settings can be changed: DEFAULT OPTION CHANGE 0-6°F 2°F (1°C) HYSTERESIS (0-3°C) Defines the number of degrees the temperature must go beyond a setpoint prior to changing from HEAT to COOL mode or vice versa in AUTO mode.

  • Page 49: Device Info Screen

    CONFIG ID: Customer Configuration File Identification Number and Version. Both are numbers from 0 to 255, separated by a dot. When no Customer Configuration File has been programmed, the Value shown will be NOT AVAILABLE. In this case, the standard Energate default values will be used. Page 49...
  • Page 50 Version. Both are numbers from 0 to 255, separated by a dot. When no Customer Configuration File has been programmed, the Value shown will be NOT AVAILABLE. In this case, the standard Energate default values will be used. Page 50...

  • Page 51: Zigbee Link Info Screen

    ZigBee Link Info Screen The Link Info screen is also read-only and it is available through the Setup menu. The Installer password must be entered to access the screen. The ZIGBEE LINK INFO screen provides the following information: • The ZIGBEE Link Icon, as described in the Title Bar section of this manual. •...
  • Page 52 ZIGBEE Link Info Screen (continued) • STATUS: The label inside the box describes the status of the communication link Possible labels are: SEARCHING FOR RADIO SEARCHING FOR NETWORK JOINING NETWORK SEARCHING FOR TRUST CENTER WAITING FOR SECURE LINK SEARCHING FOR ESP WAITING FOR VALID CONNECTION CONNECTION ACTIVE At the right end of the title bar of the ZIGBEE LINK STATUS box is the Status Code.

  • Page 53: Reset Screen

    Reset Screen The Thermostat has three different resets to Factory Default values: • THERMOSTAT RESET • USER CONFIGURATION RESET • SECURITY KEYS RESET The following sections provide additional information on each of these resets. Page 53...

  • Page 54: Thermostat Reset

    Thermostat Reset A THERMOSTAT RESET restores the thermostat to the following original manufacturer settings HEAT COOL WAKE 70.0ºF 78.0ºF LEAVE 62.0ºF 85.0ºF RETURN 70.0ºF 78.0ºF SETPOINTS SLEEP 62.0ºF 82.0ºF UNOCCUPIED 62.0ºF 85.0ºF OCCUPIED 70.0ºF 78.0ºF SETPOINT 7 62.0ºF 85.0ºF HOLD 70.0ºF 78.0ºF SCHEDULE...
  • Page 55 Thermostat Reset (continued) UNITS FAHRENHEIT (ºF) TEMPERATURE USER [1234] OFF PASSWORD INSTALLER [INST] HEAT 91.0ºF (32.8ºC) 54.0ºF (12.2ºC) SETPOINT RANGE COOL 93.0ºF (33.9ºC) 56.0ºF (13.3ºC) # OF COOL STAGES EQUIPMENT TYPE CONVENTIONAL # OF HEAT STAGES MIN ON/OFF TIME 3 MIN EQUIPMENT SETTINGS FAN ON IN HEAT CHANGE HYSTERESIS...

  • Page 56: User Configuration Reset

    User Configuration Reset The USER CONFIGURATION RESET will only restore the following settings to the factory default values listed in the previous Thermostat Reset section: • • SETPOINTS CLOCK FORMAT • • SCHEDULE LANGUAGE • • COMFORT SETTING TEMPERATURE UNITS Security Keys Reset The thermostat ships from the factory with an initial security key that allows the thermostat to set an initial temporary connection with the utility.

  • Page 57: Conventional System Test

    Conventional System Test This procedure allows the installer to bypass delays associated with the minimum on/off times. OUTPUT TESTED PROCEDURE EXPECTED RESULT Mode = OFF Fan should turn on Fan = change from AUTO to ON Mode = COOL Lower the setpoint by at least -3°F (-2°C) First stage cooling should stage cooling from room temperature and press...

  • Page 58: Heat-Pump System Test

    Heat-Pump System Test This procedure allows the installer to bypass delays associated with the minimum on/off times. OUTPUT TESTED PROCEDURE EXPECTED RESULT Mode = OFF Fan should turn on Fan = change from AUTO to ON Mode = COOL stage cooling Set the setpoint by at least -3°F (-2°C) First stage cooling should below room temperature and press...

  • Page 59: Product Conformity

    2. This device must accept any interference, including interference that may cause undesired operation. Contains Radio Module FCC ID: WUR-RM30; Industry Canada: 8022A-RM30 Caution You are cautioned that any changes or modifications not expressly approved by Energate, Inc. could void your authority to operate this equipment. Page 59...

  • Page 60: Note

    Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 61 Page 61...
  • Page 62 Page 62...
  • Page 63      Page 63...
  • Page 64 © All Rights Reserved US Patent No. 7,737,762 Page 64...

Table of Contents

Save PDF