Adjusting Density; Setting Your Changes As A New Default; Restoring All Settings To The Factory Settings - Brother MFC-J265W User Manual

Adjusting Density

You can adjust the copy density to make
copies darker or lighter.
a
Press (COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press a or b to choose Density.
Press OK.
e
Press d or c to make a lighter or darker
copy.
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Color Start.
Setting your changes as a
new default
You can save the copy settings for Quality,
Enlarge/Reduce, Density and
Page Layout that you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a
Press (COPY).
b
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring all settings to the
7
factory settings
You can restore the copy settings Quality,
Enlarge/Reduce, Density, and
Page Layout, that you have changed, to
the factory settings.
a
Press
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
7
Making copies
(COPY).
7
7
23