Start-Up Guide; Using Your New Dishwasher; Dishwasher Loading; Loading Suggestions - KitchenAid KUDS01VM Use And Care Manual

Undercounter dishwasher
Hide thumbs Also See for KUDS01VM:
Table of Contents

Advertisement

Available languages

Available languages

START-UP GUIDE

Before using your dishwasher, remove all packaging materials.
Read this entire Use and Care Guide. You will find important
safety information and useful operating tips.

Using Your New Dishwasher

1. Rinse aid is essential for good drying. Be sure to fill the
dispenser before you use your new dishwasher. Each filling
will last about 1 to 3 months depending on your usage.
2. Scrape large food soil and hard items (toothpicks or bones)
from dishes. You do not need to pre-rinse your dishes.
3. Properly load the dishwasher. (See "Dishwasher Loading.")
Load dishes with space in between so water will reach the
soiled surfaces. Make sure nothing prevents the spray arm(s)
from spinning freely.
4. Add detergent. Always use a quality brand detergent. (See
"Dishwasher Use.")
5. Run hot water at the sink nearest your dishwasher until the
water is hot. (See "Dishwasher Performance Tips.") Turn off
water.
6.
Press the desired cycle and option selections. (See
"Dishwasher Use.")
6
7. Press START. The selected cycle and option lights will flash
once.
8. Push door firmly closed. The door latches automatically.
NOTE: If the dishwasher is not started before closing the
door, the cycle and options will revert to the last cycle and
options completed.
DISHWASHER
LOADING

Loading Suggestions

Remove leftover food, bones, toothpicks and other hard
items from the dishes. To conserve water, energy and save
time, it is not necessary to rinse dishes before putting them
into the dishwasher. The wash module removes food particles
from the water. The module contains a chopping device
which will reduce the size of food items.
NOTE: If hard items such as fruit seeds, nuts, and egg shells
enter the wash module, you might hear chopping, grinding,
crunching, or buzzing sounds. These sounds are normal
when hard items enter the module. Do not let metallic items
(such as pot handle screws) get into the wash module.
Damage can occur.
It is important for the water spray to reach all soiled surfaces.
Load dishes so they are not stacked or overlapping if
possible. For best drying, water must be able to drain from all
surfaces.
Load heavy pots and pans carefully. Heavy items can dent
the stainless steel interior of the door if they are dropped or
bumped.
Make sure pot lids and handles, pizza pans, cookie sheets,
etc., do not interfere with the spray arm rotation.
Conserve water, energy and save time over hand rinsing by
running a rinse cycle to keep dishes moist if you do not plan
to wash them soon. Foods such as eggs, rice, pasta,
spinach, and cooked cereals may be hard to remove if they
are left to dry over a period of time.
Quiet operating tips
To avoid thumping/clattering noises during operation:
Make sure lightweight load items are secured in the racks.
Make sure pot lids and handles, pizza pans, cookie sheets,
etc., do not touch interior walls or interfere with the rotation of
the spray arm.
Load dishes so they do not touch one another.
NOTE: For built-in models, keep sink drain plugs closed during
dishwasher operation to prevent noise transfer through drains.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kuds01fl

Table of Contents