Getting Started - SENDO Cell Phone User Manual

3

Getting started

To use your phone, you must first insert the
SIM card supplied by your service provider,
and then charge the battery.
ζ
Note: You cannot insert or remove the
SIM unless you remove the battery.
Removing the back cover
Inserting the SIM card
Slide the SIM into place, starting with the left
edge first, making sure that the golden-
coloured contacts of the card are touching
the contacts of the phone.
Press down on
the central
area at the top
ζ
of the back
cover of the
phone, and lift
the cover off.
Fitting the battery
Insert the battery into the phone, starting
with the right side first. Align the tabs on the
edge of the battery with the tabs on the
edge of the phone. Make sure the golden-
coloured contacts of the battery are
touching the contacts on the phone. Push
down into place.
8
Note: Keep all SIM cards out of small
children's reach. The SIM card is easily
damaged by scratches or bending, so
be cautious when inserting and
removing the card.
3