Getting Started; Removing The Back Cover; Removing The Battery; Inserting The Sim Card - SENDO P600 Manual

2

Getting started

2
To use your phone, you must first insert the
SIM card supplied by your network service
provider, and then charge the battery.

Removing the back cover

Press down on the area on the top of the back
cover, slide the cover down and lift off.

Removing the battery

If you need to remove the battery, press down
on the tab at the centre of the bottom edge of
the battery and lift out.
>
Note: Always turn your phone off before
you remove the battery.

Inserting the SIM card

>
Note: You cannot insert or remove the
SIM unless you remove the battery.
Always turn your phone off before you
remove the battery. See the Removing the
battery section above for details.
Slide the SIM into place, starting with the
shorter edge first, making sure that the gold-
coloured contacts of the card are facing
down, touching the contacts of the phone.
!
Warning:
of small children. This small part can be
swallowed.
!
Warning:
by scratches or bending, so be careful
when inserting and removing the card.
[[[ ]]]
6
Keep all SIM cards out of reach
The SIM card is easily damaged