Digium Asterisk Appliance 50 AA50 Administrator's Manual page 54

Chapter 3: Telephone System Configuration
Dial Plan - This option references the Dial Plans option on the left
tool bar. Based on the calling rules you've created, you can restrict the
outbound dialing of this extension to local calls, emergency calls, and
standard long-distance calls for North America. This option also possi-
bly allows blocking or allowing international (011 prefix dialed) calls.
Caller ID - Identifies the Caller ID presented when the listed exten-
sion dials an internal extension.
Outbound Caller ID - Identifies the Caller ID presented when the
listed extension dials an extenal number. Your ability to manipulate
your outbound CID may be limited by your VoIP provider. Manipula-
tion of CID across analog trunks is not possible.
Enable Voicemail - Builds a voice mail box for the extension that can
be reached by dialing the Check Voicemail extension. The Voicemail
extension can be configured. The current default is 6050.
Voice Mail Access Pin Code - The password used to access voicemail
for the specified extension.
E-mail Address - Voice mails received by this extension can be sent
as audio file attachments e-mailed to a specific address.
SIP - Identifies whether the extension sends and receives calls using
the VoIP protocol SIP.
IAX - Identifies whether the extension sends and receives calls using
the VoIP protocol IAX.
Analog Station - A drop-down menu is available to identify the ana-
log phone port which this extension will access. If more than one
phone is connected to your Asterisk Appliance 50 you may need to
confirm the port number listed on the back of the AA50.
Flash - Flash Timing defines the duration, in milliseconds, that Aster-
isk will use if it is sending a flash signal to another system.
Release 1.20 Digium, Inc. Page 54