Analog Hardware Configuration
You must configure your analog hardware according to the needs of your
system as part of your initial AA50 configuration. The Configure
Hardware page gives you the ability to configure both your FXS and
FXO ports, as well as your Tone Region, operation mode, message
waiting indicator mode (MWI), etc. The number of FXS and FXO ports
available for configuration will depend on the AA50 model you
purchased. Click the Configure Hardware tab to configure your analog
hardware.
Note: The Configure Hardware tab will not be available if you
ordered a VoIP only model.
Release 1.20
Chapter 3: Telephone System Configuration
Figure 7: Configure Hardware
Digium, Inc.
Page 33