Related Manuals for TeleWell TW-EA510v3 (c) 3G
Summary of Contents for TeleWell TW-EA510v3 (c) 3G
-
Page 1: Quick Start Guide
TeleWell TW-EA510v3 (c) 3G/4G ADSL & 3 G/4G M odem R outer Firewall W LAN A P ( 802.11 b /g/n) Quick Start Guide... -
Page 2: Package Contents
USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON CD-ROM. Package Contents TeleWell TW-EA510 ADSL 3G/4G Modem Router Firewall WLAN AP (802.11 b+g+n) CD containing the on-line manual and QSG RJ-11 ADSL/ telephone cable Ethernet (RJ-45) cable Two 2dBi detachable antennas Power adapter 12V DC, minimum 1.2A... -
Page 3: Hardware Overview
Quick Start Guide Hardware Overview Hardware Overview The Front LEDs Blink green when power is Lit green when the device Lit green when a wireless on and system is booting. is successfully connected connection is established. Lit green when the system Blink when data is being to an ADSL DSLAM. -
Page 4: Hardware Connection
TeleWell TW-EA510v3 (c) ADSL 3G/4G Modem Router Hardware Connection Hardware Connection ADSL Router Mode 3G Router Mode... -
Page 5: Hardware Installation
Quick Start Guide Hardware Installation Installation Hardware 1. Power Connection Plug the supplied power adapter to the wall jack and the other side to the router. Please note that the plug type may differ according to country. 2. LAN Connection Connect the supplied RJ-45 Ethernet cable to Ethernet port 1 (Note: Ethernet ports 1, 2, 3, and WIFI are in same subnet with NAT and Firewall. - Page 6 TeleWell TW-EA510v3 (c) ADSL 3G/4G Modem Router 4. USB Connection The USB 2.0 port supports 3G/ HSDPA modem connectivity: users can conveniently access Internet via 3G, eliminating the limitations of the wired network. This solution also employs an auto fail-over feature to ensure always-on connectivity for SOHO users.
- Page 7 Quick Start Guide 6. Splitter/ Micro-filter Connection Splitter / Micro-filter are important for ADSL installation. High-frequency signals are directed to the ADSL modem, and low-frequency signals are directed to the telephone or other analog voice-channel device to prevent inter-modulation distortion and also to get good speed and stable ADSL sync rate. a) Splitter connection If the installation has only a single telephone and a single ADSL modem, then a splitter can be employed.
-
Page 8: Router Configuration
TeleWell TW-EA510v3 (c) ADSL 3G/4G Modem Router Router configuration Router configuration Connecting to the Router Connecting to the Router 1. Open the web browser and type http://192.16 http://192.16 8.0 8.0 .254 .254 in the browser's address box. This number is the default IP address for this router. Press Enter. - Page 9 Quick Start Guide...
Need help?
Do you have a question about the TW-EA510v3 (c) 3G and is the answer not in the manual?
Questions and answers